Official Maytag Washer Switches

Dryer 3 Wire Door Switch

$25.95

Fix Number: FIX11741701
Manufacturer Part Number: WP3406107

This OEM dryer door switch is an on/off mechanism that detects when the door is open to prevent the dryer from operating. If your dryer will turn on but will not start or continues working while the door is open, you may have a faulty door switch. This part features the switch and three wires, is white in color, and measures 6.5 inches long. This switch replaces the two-wire switch that is on many models. You will find this part attached to the inside of the top end of the front panel. One end attaches to the wiring harness and the other goes through the panel to make contact with the door when the door is closed. This is a regular wear part due to such frequent use or continuous harsh handling. Depending on how the switch broke, it might make it impossible to start or stop your drying cycle. You can test the function of this part by pushing on the black tab that sticks out of the front panel to make contact with the dryer door. If there is no resistance in the tab and it does not make a clicking sound, it likely needs to be replaced.

Fixes these symptoms

Door won’t close
Drum Not Spinning
Light not working
See more...

Watch the install video

Washer Lid Switch

$48.26

★★★★★

6 Reviews

Fix Number: FIX11745957
Manufacturer Part Number: WP8318084

On the lid on your washing machine there is a pin that engages with the lid switch. This works by telling the machine that the lid is closed which then allows for the washer to start. If your washer is not starting, or does not advance through the different cycles, there may be a problem with your lid switch. This part can wear out or become damaged over time and will need to be replaced so your machine can operate. Replacing this genuine OEM part is an easy job that requires the use of a Philips screwdriver along with a 5/16-inch nut driver. You will need to disconnect the power to your washer before beginning this repair and pull the machine away from the wall so you can easily access the back panel. Since the lid switch is found underneath the control panel, you will need to unscrew and lift the panel back to gain access. In order to remove the old switch, you first disconnect the wire harness, and remove the screw holding the grounding wire in place. The lid of the washer needs to be lifted, as the pin will be engaged with the switch if the lid is in the closed position. With the lid still open, the new switch can be put in place, install the screw for the grounding wire, and reattached the wire harness. The control panel can then be lowered back down, ensuring the locking tabs are engaged.

Fixes these symptoms

Burning smell
Cycle Not Advancing
Lid or door won’t close
See more...

Door interlock switch & holder assembly

$21.77

Fix Number: FIX12349017
Manufacturer Part Number: W11197766

Fixes these symptoms

Door not closing properly
Won’t turn on
See more...

Water Level Switch

$55.32

Fix Number: FIX11754877
Manufacturer Part Number: WPW10448876

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

Fixes these symptoms

Cycle Not Advancing
Draining Issues
Water Filling Issues
See more...

Watch the install video

Washer Lid Switch

$23.60

Fix Number: FIX11723153
Manufacturer Part Number: W10820036

This 3 prong lid switch is used for washing machines that do not have a tub light.

Fixes these symptoms

Will not agitate
Will not drain
Will Not Start
See more...

Watch the install video

Lid Switch Assembly

$42.26

★★★★★

1 Review

Fix Number: FIX11739302
Manufacturer Part Number: WP22001682

This black lid switch assembly comes complete with a bracket, two switches, and a fuse. An open fuse might indicate that the lid switch is bad. The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.

Fixes these symptoms