Washer Belts

★★★★★

★★★★★

1 Review

Fix Number

FIX16542496

Manufacturer Part Number

WE03X29897

This 89.5-inch drive belt is for dryers. It has a 4-rib design on the inside for a better grip. If comparing the size of your current belt to the new one, keep in mind that a small amount of stretching and contortion will occur over time, and this belt will fit despite small inaccuracies. You will find this part wrapped all the way around the dryer drum, around a tension pulley, and around the drive motor pulley. This allows the parts to work together to spin the drum as the motor rotates. A common symptom of a broken drive belt is a drum that will not turn. This part is prone to wear and tear over time and will likely stretch or become brittle, leading to complete breakage of the part. The drum cannot spin without a drive belt, so it needs to be replaced immediately. For this repair, we recommend wearing work gloves to protect your hands from sharp edges, disconnect the power, remove the main panel, and access the motor drive to secure the new belt in place.

★★★★★

★★★★★

1 Review

Fix Number

FIX12299369

Manufacturer Part Number

WH01X27538

Fix Number

FIX11705916

Manufacturer Part Number

4400EL2001F

If the drum in your dryer will not tumble, or it is noisy while operating, there may be an issue with the drum belt. The belt is found looped around the dryer drum, a tension pulley, and a motor pulley and is used to rotate the drum so that your laundry tumbles. Over time the belt can become stretched out, or it becomes brittle and will snap. If this happens the belt will need to be replaced. If you need a replacement, this is a genuine OEM dryer drum belt. The belt measures about a quarter inch wide, and has four ribs and three groves. Please be sure to disconnect the power supply to your dryer before beginning this repair.

★★★★★

★★★★★

1 Review

Fix Number

FIX11747978

Manufacturer Part Number

WPW10006384

The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an issue with the drive belt. Over time the belt can become worn and snap, or it can become loose and no longer provide the proper grip to spin. This is a genuine OEM part for your washer that is black in color and made of rubber.

★★★★★

★★★★★

1 Review

Fix Number

FIX2005284

Manufacturer Part Number

12112425

Over time, the belts in your washer can either stretch out and sag, or become brittle and snap. When this happens, it can result in the belt losing its grip and will not be able to spin or drain the tub. If this happens, the belts will need to be replaced. This OEM belt kit includes the drive belt and the pump belt, which are both V-shaped, and made of black rubber. The pump belt is located between the motor and pump under the washer, and the drive belt is looped around the drive and motor pulley at the bottom of the machine. This repair is easiest to complete if the washer is placed on its back, and you will need to disconnect the power and water supply.

Fix Number

FIX11736832

Manufacturer Part Number

WH01X24180

Fix Number

FIX4133825

Manufacturer Part Number

6602-001655

This black rubber drum belt connects the motor pulley to the dryer drum, enabling the drum to rotate as the motor runs. Positioned between the drive motor and the drum, it plays a key role in the drying process. If the belt breaks or wears out, the drum may stop turning properly. Replacing the belt is a straightforward repair that typically takes only a few minutes. To install, pull the dryer away from the wall, remove the rear panel using a Phillips screwdriver, and position the new belt around the motor pulley and drum. Each belt is sold individually.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX1146950

Manufacturer Part Number

134511600

If your washer drum is not spinning, there may be an issue with your drive belt. The drive belt wraps around the motor pulley and helps the basket to spin. Other signs there are issues with the belt is if there is a burning rubber smell, or the washer is noisy while spinning. The belt is subjected to wear and tear, and over time it may wear out. This is a genuine OEM part that is made of rubber.

Fix Number

FIX12578772

Manufacturer Part Number

W11239857

The drive belt is an essential part of the washing machine’s mechanical system. It connects the drive motor to the drive system, enabling the washing machine’s basket to spin. If your washing machine has trouble spinning or is making unusual noises during the spin cycle, the drive belt may need to be replaced. This genuine OEM part is designed to work with specific washing machine models, so it’s important to verify compatibility with your unit before purchasing. Installing this part requires unplugging the washer and following safety precautions. Wear work gloves to protect your hands during the installation process.

★★★★★

★★★★★

1 Review

Fix Number

FIX11738882

Manufacturer Part Number

WP21352320

This is a V-style drive belt that measures approximately 51-inches long and 3/8-inches wide. This part connects the drive motor to the drive system in the washer to turn the basket. It is prone to wear with time and require replacement. Some common signs that the drive belt may be worn is if the motor continues to run, but the washer is not agitating, spinning, or draining. This part is sold individually and is OEM authorized.