Magic Chef Refrigerator Parts

Magic Chef Appliance Parts

Popular Magic Chef Refrigerator Parts

★★★★★
★★★★★
4 Reviews
Fix Number
FIX11722130
Manufacturer Part Number
EDR4RXD1
This package contains one individual water filter that is NSF-certified, and OEM approved. To ensure that the filter is successfully removing contaminants, it will need to be replaced at least every 6 months or 200 gallons of water. This will ensure tasteless and odor-free water. It has approximate measurements of 2-1/2 inches deep, 1-1/2 inches wide, and 8 inches high. This is a simple installation. This filter is found on the interior of the refrigerator in a drop-down style housing. Pop out the old filter, slide the new filter in place and turn it until it clicks. Be careful not to over-tighten. Close the cover. Run your dispenser to activate the filter and clear out air bubbles. A loud air pressure sound is completely normal. Reset your water filter indicator if applicable.
Fixes these symptoms
  • Fridge too cold
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • See more...

Installation Instructions

Blaine from Huntley, IL
Needed new h2o filter
Used my hands only...no tools necessary Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX884734
Manufacturer Part Number
8009
This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and unscrew by hand to replace. It is designed to tolerate extreme temperatures, which is why it is commonly used to light the inside of refrigerators and ovens. Depending on the appliance and location of the bulb, disconnecting the power is recommended. This bulb is sold individually.

Installation Instructions

Helen from Quincy, MA
lightbulb in refrigerator went out
Removed plastic shield on top of refrigerator. Removed old bulb.. Replaced new bulb. Reinstalled plastic shield. Voila! Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX2121513
Manufacturer Part Number
D7824706Q
If your freezer has stopped making ice cubes, it may be time to replace your ice maker. Normal wear and tear, or accidental damage may be the cause of this. This model includes the control device and ice mold, which are made of plastic and metal, and measure approximately 11 inches long by 5 inches wide. Please note that this kit does not include the cover, ice level arm, or the wire harness. These parts can be ordered separately, or you can use the existing parts from the original ice maker. This Replacement Ice Maker is a genuine OEM part and is also known as an Ice Maker Assembly or a Refrigerator Ice Maker. Installation will require a quarter inch nut driver, and make sure that you disconnect your power and water supply before beginning this repair. Once the new part is in place, your fridge will begin making ice again within a few hours.
Fixes these symptoms
  • Clicking sound
  • Doesn’t stop running
  • Ice maker dispenses too little ice
  • See more...

Installation Instructions

Edward from Casa Grande, AZ
Unit quit working. Wouldn't cycle any more. Made sounds like gears were maybe stripped..
Followed installation video on this web site. Works like a new one ! Read more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX12728638
Manufacturer Part Number
W11384469
Door switch turns the light off when you close the door.
Fixes these symptoms

Installation Instructions

Marilyn from Dublin, OH
Light switch no longer worked
Turn off and unplug your refrigerator. I used the screwdriver on the left side of the part (where the plug is) and used the putty knife at the same time on the right side to push the spring lock portion of the part in. The part snapped out. I unplugged the left contact from the plug and put it on the new part, then I unplugged the right contact and put it on the new part. I did this so the wires would not go up into the refrigerator and be hard to find. I put the left side of the new part where the plug and contacts are in first then I snapped the right side in place. I plugged the refrigerator back in and it worked perfectly. Just take your time and gently remove and reconnect the new part. The store where I bought my refrigerator wanted $69.95 for a service call plus an hourly charge and part charge. Count on this site for your parts and do it yourself. I ordered the part on Monday, it was delivered on Tuesday around noon and I made the repair that afternoon. Read more...
Door Switch
$28.93
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX12731166
Manufacturer Part Number
W11396033
This part includes one authentically sourced 3-pin rocker switch for a refrigerator. It is responsible for turning the light on inside the fridge when the door is open. It is commonly replaced because the light has stopped turning on with the door open. For this simple repair, start by disconnecting the power. Use a putty knife and a flathead screwdriver to pry the door switch out of the liner. Disengage the wire harness to release the damaged switch. Install the new door switch by first connecting it to the wire harness. Line the switch up on the liner and snap it into position. Power it back up and double-check that it is working.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Light not working
  • See more...

Installation Instructions

Edward from Greer, SC
Switch actuator was broken
Replaced the switch. It was easily pried out with the putty knife blade by sliding the knife blade under the switch flange, depressing the lock tab and gently twisting the knife blade to pop the switch body out. Unplug the connector to remove the faulty switch from the wiring harness and plug in the replacement. The connector is designed to fit on only one way. Push the wiring and the switch back into the opening, orienting the new switch in the same orientation as the old switch. It snaps in with light finger pressure. Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11757023
Manufacturer Part Number
WPW10662129
The capacitor, also known as a run capacitor, is a component in your fridge that allows the compressor to cycle on and off to maintain a constant temperature. If your fridge and freezer are too warm it may be necessary to replace the capacitor. Other symptoms include an unusually noisy and overheated compressor. You can check the capacitor for continuity using a multimeter. This is a genuine OEM replacement part made of black plastic that measures 1 inch by 1.5 inches. When replacing this part, be sure to check the electrical contacts on the old capacitor. If they are corroded or burnt, you will need to replace the overload relay assembly as well. Be sure to disconnect the power supply to your refrigerator before beginning this repair.
Fixes these symptoms
  • Clicking sound
  • Freezer not defrosting
  • Freezer section too warm
  • See more...

Installation Instructions

Lisa from Yulee, FL
Both comparments very warm but fan working and lights on
Bought Capacitor, but I had to purchase Combo Start Up Kit that Cap goes into. The site said that 78% of the time my problem of both compartments being warm were resolved/repair by replacing Capacitor, but when the item was replaced it did not and my son looked further and found that it would then be the Combination Start Up Kit (Part# PS11740412), which starts the compressor. Thanks to this site the video used to install both parts. I was able to use the old Capacitor and I am returning the new one first purchased. Read more...
Fix Number
FIX11739936
Manufacturer Part Number
WP2256704
This crisper pan, or drawer, is made for your refrigerator. The drawer has a controlled environment to ensure a proper humidity level to keep your produce fresh for longer. It is clear in color and made of plastic. It is approximately 13 inches by 10 inches at the base of the pan.
Fixes these symptoms

Installation Instructions

Dan from Crawfordsville, IN
Broken Drawers
Put the new ones in Read more...
ICE MAKER FIELD INSTALL KIT (T
$125.30
In Stock
Fix Number
FIX17917059
Manufacturer Part Number
W11729596
Fixes these symptoms

Installation Instructions

Franklin from Montevallo, AL
Need to say, tiny metal sheath inserted in plastic water line to ice maker is required.
Part was included, but no mfg instructions noted. We couldn't understand where the problem was! Then, we noticed the old line had metal tip inside hose line... Reconnected the line and PRESTO, it works like brand Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11750673
Manufacturer Part Number
WPW10225581
The bi-metal defrost thermostat is attached to the evaporator, and its purpose is to protect the evaporator from overheating when the defrost cycle is running. If there is frost building up in your freezer, or it gets too warm during the defrost cycle, there may be an issue with the thermostat. You can use a multimeter to determine if it is the thermostat or the heater itself that is faulty. If you do need to replace the thermostat, this is a genuine OEM part. As this repair requires some electrical work, please be sure to disconnect the power supply to your fridge before starting this project. You will need a Phillips screwdriver, a 1/4-inch nut driver, a flat blade screwdriver, wire strippers, electrical tape, and butt splice connectors in order to complete this repair.
Fixes these symptoms
  • Freezer not defrosting
  • Freezer section too warm
  • Freezer too cold
  • See more...

Installation Instructions

Rudy from Chaumburg, IL
No ice warm frig and freezer
Took off back panel disconnected wires cut off senser And replaced with new one followed video provided put back to gether working great know thank you loved the help . Read more...
Fix Number
FIX11738927
Manufacturer Part Number
WP2156003
This genuine OEM part is an end cap for the door shelf retainer bar in your refrigerator. The end cap is used to secure the retainer bar and attach it to the fridge or freezer door. It is made of white plastic and is sold individually. If the retainer bar is not staying in place, a damaged end cap could be to blame. The retainer bar has release tabs that will need to be unhooked in order to remove the damaged end cap. The new end cap can then be snapped into place on the retainer bar and installed back inside the fridge. No tools should be required for this repair, but a flat blade screwdriver may help to release the locking tabs.

Magic Chef Refrigerator Appliance Types

Related Magic Chef Refrigerator Parts

Popular Magic Chef Refrigerator Models