Uni Range Parts

Uni Appliance Parts

Popular Uni Range Parts

Oven Bake Element
$47.55
In Stock
★★★★★
★★★★★
10 Reviews
Fix Number
FIX438018
Manufacturer Part Number
316075103
This genuine OEM bake element is located on the bottom of the oven cavity to supply heat for baking. The approximate size is 19-1/2 inches wide by 18-1/2 inches long and has 3-1/2 inch inserts. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. Please remember to disconnect the power to your oven before you start your repair. Next, remove the 2 screws securing the old element, pull it out, and discard. Connect the new element prongs where the old element fit and screw it back in place. This is a very simple repair that anyone can do.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Little to no heat when broiling
  • See more...

Installation Instructions

Werkheiser from Saylorsburg, PA
Bake element broke
Extremely easy. I unscrewed two screws and pulled out old element and plugged in the new one. Pushed back in and screwed the screws back in. That's it Read more...
Drip Bowl - 8"
$12.57
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX437595
Manufacturer Part Number
316048413
This OEM drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. Drip bowls catch any spills, and are a quick, easy, and cheap way to improve your cooktop aesthetic. While the replacement may be visually different from the original, it will fit your appliance. If your drip bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. This drip bowl is sold individually, so if you would like to replace all 4 drip bowls on your appliance you will need to account for this. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.
Fixes these symptoms

Installation Instructions

Mike from Buffalo, NY
Replaced accessories for top of electric range
I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...
Chrome Drip Bowl - 6"
$7.45
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX437596
Manufacturer Part Number
316048414
This drip bowl is an OEM approved replacement part designed for use with various electric ranges and cooktops. This part is located underneath the burner to contain any spills while cooking. It fits under 6-inch burner elements and has a diameter of approximately 8-inches. While the replacement may be visually different from the original, if you have used your correct model number to search, this will fit your appliance. Common reasons to replace this often neglected part is if it has become discolored, corroded, or otherwise damaged. Each drip bowl is sold individually. This is a good time to inspect all drip bowls on the appliance, if you would like to give your appliance a fresh look, keeping in mind that they may be different sizes and are sold separately. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.
Fixes these symptoms

Installation Instructions

Mike from Buffalo, NY
Replaced accessories for top of electric range
I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX1145040
Manufacturer Part Number
316436001
The infinite burner switch is used to control the temperature of the burner element on your stove top. This model is for the larger, eight-inch element. If your burner is not heating up or has uneven temperatures, you should first check with a multimeter to see if the issue is with the element or with the infinite burner switch. If you need to replace the switch, first disconnect the power supply to your range. To change this part, you will need access to the back panel, so you will need to pull the appliance out from the wall. To complete the repair, you will need a pair of needle nose pliers, a number one square head screwdriver, and a Philips screwdriver. The specifications for this genuine OEM part are that the switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when broiling
  • Oven is too hot
  • See more...

Installation Instructions

Dan from RICEBORO, GA
8" burner on stove would go to high heat even if set on low.
Pulled stove out.
Disconnected plug.
Removed back upper cover (6 screws).
Removed upper and lower wiring harness (quite easy).
Removed burner knob (on front of stove), removed two screws holding infinite switch.
Removed old switch, replaced with new.
Replaced screws at front.
Replaced burner knob.
Reinstalled back plate, plug in, good to go.
Read more...
Terminal Block Kit
$16.19
In Stock
Fix Number
FIX470125
Manufacturer Part Number
5303935058
This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.
Fixes these symptoms
  • Element will not heat
  • Oven not heating evenly
  • Will Not Start
  • See more...

Installation Instructions

SHIRLEY O from boxborough, MA
burner would not heat
removed burners, cut wires to each burner, installed new wires from terminal block kit. reinstalled surface element. Followed directions from video located at site of the ordered items Read more...
Fix Number
FIX2339242
Manufacturer Part Number
316442301
The surface elements provide heat for cooking on the top your range, typically in a smaller and larger size to fit your various pots and pans. If an element is not heating up, it is a sign that it should be replaced. This is an easy repair that does not require any tools. Before beginning this repair, ensure that the elements are turned off and cold to the touch. With the element removed, inspect the terminals for signs of corrosion or arcing. If these are present, you will need to replace the terminal block as well, or you will have the same issues come up again. This OEM replacement part measures 8 inches in diameter with five coils.
Fixes these symptoms

Installation Instructions

SHIRLEY O from boxborough, MA
burner would not heat
removed burners, cut wires to each burner, installed new wires from terminal block kit. reinstalled surface element. Followed directions from video located at site of the ordered items Read more...
Flat Style Oven Igniter
$35.83
In Stock
Fix Number
FIX470129
Manufacturer Part Number
5303935066
If your gas range will not heat up, is not coming up to temperature, the igniter is not glowing, or it glows but will not light, you may need to replace the igniter. This part is a genuine OEM flat style oven igniter and includes two ceramic wire nuts to assist with installation. The igniter is used to light the oven burner in your range by igniting the gas. Before beginning this repair, please be sure to disconnect the power and gas supply to your range. When handling this part, be careful not to touch the black element on the igniter, as this section is very fragile. The igniter measures approximately 3.72 inches in length, with 18 inches of wire lead, and has an amperage range of 3.2 to 3.6.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Gas smell
  • See more...

Installation Instructions

Mary from Ticonderoga, NY
When turning on the oven, it would not ignite.
Unplug the power.Took off the broiler door . Reached in , unscrewed the two screws holding the igniter (one screw was stripped so that gave me a little problem) put on the new igniter. Stripped the wires & put the caps on. Plugged back in the stove & worked great. Read more...
Light Bulb
$19.71
In Stock
Fix Number
FIX12751166
Manufacturer Part Number
316538904
Clear, 120 Volt, 40 Watt.

Installation Instructions

Chris from Lillington, NC
Broken bake element & light bulb
Turned of the power at the fuse box as the oven was hard wired to the electrical source and then removed the old element via the screws at the back of the oven. Disconnected the wires from the element and then reconnected those to the new element. Screwed the element base to the back wall of the oven and then replaced the light bulb. Read more...
Rear Drawer Glide
$5.33
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX434227
Manufacturer Part Number
3051163
If you are having difficulty opening or closing the drawer at the bottom of your range, the drawer glides may be damaged. These genuine OEM rear drawer glides help to support the side of the drawer and prevent metal-to-metal contact when the drawer is pulled in and out. Replacing the part is an easy repair, and just requires a flat blade screwdriver. Remove the drawer from the bottom of your range and place it on a suitable work surface. Remove the broken drawer glide by disengaging the locking tab with the screwdriver. Snap the new drawer glide into place and put the drawer back in the bottom of your range, ensuring that the tracks are lined up. The drawer should now slide in easily. Please note that these parts are sold individually, but your drawer requires four glides ? one for each corner. If you need to replace more than one drawer glide, make sure you add the correct quantity to your cart.
Fixes these symptoms

Installation Instructions

Nelson E. Holley from Pottsville, PA
broken rear drawer glide
snap it out and snap it in. Read more...
Fix Number
FIX2339241
Manufacturer Part Number
316442300
If the burner element on your range is damaged or no longer heating up, the element should be replaced. When you remove the element, check the terminals for any signs of corrosion or arcing. If you find these, you will also need to replace the terminal block (which can be purchased separately). Replacing this part is easy and does not require any tools. Please ensure that the burner is turned off and cool to the touch before beginning the repair. Lift up and pull out the old element, then line up the new one and insert into the terminal block. This is a genuine OEM part that measures 8 inches in diameter, has four turns, 220 volts, and looped terminal ends.
Fixes these symptoms

Installation Instructions

Mike from Buffalo, NY
Replaced accessories for top of electric range
I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...

Uni Range Appliance Types

Related Uni Range Parts

Popular Uni Range Models