OEM Broan Range Hood Parts & Accessories

Lamp Diffuser

$51.06

★★★★★

1 Review

Fix Number: FIX10432313
Manufacturer Part Number: S97018564

Lens

$49.83

Fix Number: FIX10281910
Manufacturer Part Number: SB03293051

This lens is sold individually and sourced right from the original manufacturer. This clear plastic part measures approximately 3.5-inches long by 2.5-inches wide. It helps to protect the light bulb and disperse and soften the light. If this plastic part cracks it will need to be replaced. To install your new lens, no tools are needed, just remove the old lens and pop the new one into place into the brackets.

Side Fastener, Black

$24.91

Fix Number: FIX12009610
Manufacturer Part Number: SB080814099

Filter

$39.86

Fix Number: FIX10280177
Manufacturer Part Number: S97007696

Light Lens

$39.86

★★★★★

1 Review

Fix Number: FIX10281344
Manufacturer Part Number: S99110437

This is an OEM light lens for a range hood and it is sold as an individual part. It is also sometimes referred to as a bulb cover, as this small plastic piece encases the bulb, protects and hides it. This part is easily installed by just snapping it into place, no tools required.

Installation Instructions

John C from BELLA VISTA, AR

The hood light stopped working (switch failure - not the light bulb or socket), the fan switch worked fine, but replaced anyway.

1. Shut off applicable circuit breaker to isolate power to exhaust hood.
2. Unscrewed the single machine screw holding the wiring channel cover in place. Used 1/8" nutdriver.
3. Tape labeled (R & L) the associated electrical wires to light switch and colored wires to fan switch for exact replacement.
4. Pulled off the connector wires by the metal clips using needle nose pliers (some were very stubborn (grease corrosion or tight).
5. Could not pinch the plastic expanders on switches and push through from rear as I expected. Had to pry switches from front with screwdriver, wiggle one side free, and then force switch through from back side. This was the hardest task as they fight to stay in place. They come out the front side only.
6. Inserted from the front both fan and light switches, noting the switch label positions of the new and old to get the wiring and on-off positions to be the same as the old.
7. Reconnected all the labeled wires to the new switch pole connectors.
8. Turned on circuit breaker and tested new switches.
9 . Replaced the wiring channel cover and screwed in the metal holding screw with nutdriver. Read more...

Aluminum Filter Kit For 30" Hood

$56.05

Fix Number: FIX10281110
Manufacturer Part Number: S99010299

Switch Assembly Black

$62.28

Fix Number: FIX10280793
Manufacturer Part Number: S97017730

Light Lens Qt20000-A

$39.86

★★★★★

1 Review

Fix Number: FIX10282138
Manufacturer Part Number: SNTK7504000

Light Bulb 40-Watt - 2 Required

$39.86

★★★★★

1 Review

Fix Number: FIX10281817
Manufacturer Part Number: SB02300264

Grease Filter

$39.86

Fix Number: FIX10281130
Manufacturer Part Number: S99010370

This is an OEM aluminum grease filter for a range hood. It measures approximately 5-7/8-inches by 16-15/16-inches. It is recommended to change this filter every six months to ensure it fulfills its purpose of removing dirt, grease, debris and odors. It can be cleaned in the dishwasher, making it very convenient to keep well-maintained. For this quick and easy repair, remove the four screws that hold the cover in place. Remove the metal cover, take off the metal wires, and remove the grease filter. Secure the new grease filter in place and reassemble.

Broan Range Hood Parts

Popular Broan Range Hood Parts

Installation Instructions

Broan Range Hood Appliance Types

Related Broan Range Hood Parts

Popular Broan Range Hood Models

Broan Range Hood Parts

Start With Your Model Number

Popular Broan Range Hood Parts

Installation Instructions

Broan Range Hood Appliance Types

Related Broan Range Hood Parts

Popular Broan Range Hood Models