KitchenAid Cooktop Parts

KitchenAid Appliance Parts

Popular KitchenAid Cooktop Parts

Drip Bowl - 6 Inch
$10.09
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX2366565
Manufacturer Part Number
W10196406RW
The drip bowl is used for electric ranges or cooktops with the coiled style burners, to catch any drips, spills, or crumbs that may occur while cooking. If your bowls have become discolored, corroded, difficult to clean, or otherwise damaged it may be time to replace them. This repair is easy and does not require any tools to complete the job. Ensure that all burners are turned off and cool to the touch before starting. First you need to lift up and disconnect the burner from the socket. While you have the burner out, it is a good time to check it for any signs of damage. Look at the terminals for any signs of arcing or burning. If you notice this, you will want to replace both the element and the receptacle it plugs into. Remove the old drip bowl by pulling it out. Then insert the new one by lining up the small hole on the side with the element block. Ensure that it is siting flat and then plug the element back into the socket. Please note that the manufacturer has substituted this part, and it no longer has a solid bottom. It is not recommended to cover the hole with products like aluminum foil, as it can trap heat or melt, becoming a fire hazard. As it is an OEM part, it ensures it will fit your model. The drip bowls are sold individually, chrome in color and about 8 inches in diameter, made to fit under a 6 inch burner element.
Fixes these symptoms

Installation Instructions

chris from ABERDEEN, SD
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...
Knob - Chrome
$16.74
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11744713
Manufacturer Part Number
WP7737P245-60
This is an OEM chrome control knob, measuring approximately 1-1/2 inches in diameter. This control knob either controls the speed of the cooktop fan or the heat of the burner. This knob is compatible with D-shaped shafts. This is a simple and tool-free repair, just pull the knob off the shaft and place the new one into place. This is a good opportunity to inspect all the knobs on your appliance to maintain a consistent appearance. Each knob is sold separately.
Fixes these symptoms
  • Element will not heat
  • Touchpad does not respond
  • Will Not Start
  • See more...

Installation Instructions

David from Edina, MN
Knob support was cracked due to age
Piece of cake to replace Read more...
Drip Bowl - 8 Inch
$10.87
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX2366563
Manufacturer Part Number
W10196405RW
The drip bowl is found underneath the burner element of ranges with a rolled terminal style plug-in surface element. The purpose of the bowl is to catch any drips or spills that may occur while cooking. If the drip bowl has become damaged or tarnished beyond cleaning, it may be time for a replacement. This is a genuine OEM part that is 8-inches in size and is sold individually. When you replace the drip bowl, you will need to remove the element from the terminal block. At this time, you should also inspect the elements for any signs of damage or corrosion and replace them if necessary.
Fixes these symptoms

Installation Instructions

chris from ABERDEEN, SD
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...
Surface Burner Plug-In Block Kit
$13.41
In Stock
★★★★★
★★★★★
4 Reviews
Fix Number
FIX340571
Manufacturer Part Number
330031
This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.
Fixes these symptoms

Installation Instructions

Doris from Skoke, IL
Elements heat sporatically
I followed the steps in the instructions which were very easy, once the electric power was turned off to the range. I replaced 2 burner plug in blocks in less than 30 minutes. I am embarrassed to say that these burners have not been functional for almost 3 years. I thought that I could not work with electric. Just make sure you have the tools on hand and read the instructions first. I am a mid-50's female, if I can do this so can anyone else! Read more...
Surface Burner - 8 Inch - 2600W
$36.90
In Stock
Fix Number
FIX11743367
Manufacturer Part Number
WP660533
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
Fixes these symptoms

Installation Instructions

Robert from Boston, MA
Range surface burner not working properly
Pulled out the old burner and slipped in the new one. Also replaced burner drip bowls. Pulled out the burners, took out old bowls, replaced with new bowls, slipped back burners. All fit perfectly. Read more...
Burner Knob - Stainless Color
$31.45
In Stock
Fix Number
FIX11744702
Manufacturer Part Number
WP7733P410-60
This replacement burner knob is made of plastic, painted in a stainless-steel color. It is a genuine OEM part for your range or cooktop, and designed to fit onto a D-shaped shaft. No tools are required to replace this part. With a firm grip on the defective knob, give a strong pull. The new knob can then be pressed onto the shaft. You may want to disconnect the power supply before beginning this repair, in case you turn on the heat to a burner when replacing the knob.
Fixes these symptoms
  • Gas igniter glows, but will not light
  • Touchpad does not respond
  • Will Not Start
  • See more...

Installation Instructions

Kim from Cenntennial, CO
needed new knobs for cooktop
Found everything very here and was sure that I had the correct parts. They came to me promptly. I am very pleased. Read more...
Burner Grate Pads - Kit of 5
$8.38
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX389174
Manufacturer Part Number
814323
These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

Installation Instructions

Carol from Charenton, LA
The rubber knobs keep coming off
I dipped them in glue made to with stand heat, Let it dry and put the burner plates back on top of the stove top. Read more...
Grate Pads - Set of 4
$8.48
In Stock
Fix Number
FIX988447
Manufacturer Part Number
8186321
Also known as grate feet.
Fix Number
FIX11743366
Manufacturer Part Number
WP660532
The manufacturer suggests replacing the receptacle at the same time.
Fixes these symptoms

Installation Instructions

Diana from Iola, KS
need new burners
Unplugged the old ones and plugged in the new ones Read more...
Fix Number
FIX16543522
Manufacturer Part Number
W11517959
Fixes these symptoms

KitchenAid Cooktop Appliance Types

Related KitchenAid Cooktop Parts

Popular KitchenAid Cooktop Models