Models > 11022342512

11022342512 Kenmore Washer

Jump to:

Find Part by Name

Diagrams for 11022342512

Viewing 6 of 6

Basket And Tub Parts

Console And Water Inlet Parts

Cover Sheet

Gearcase, Motor And Pump Parts

Optional Parts (not Included)

Top And Cabinet Parts

Most Popular Parts for 11022342512

Viewing 12 of 103

Drive Hub Kit

★★★★★

(2)

$28.32

The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may requ...

Washer Drive Pulley

★★★★★

(2)

$39.75

The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...

Dryer Screw

$5.61

This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...

Door Lock Assembly

★★★★★

(1)

$100.78

This is a genuine OEM door lock assembly for a top load washing machine. This part is also known as a door switch, and it is used to communicate whether the door to the washer is opened or closed. If ...

Refrigerator Touchup Paint (White)

$8.40

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...

Water Inlet Valve

$73.79

If your washer is leaking, will not fill with water, or will not stop filling, there may be an issue with your water inlet valve. This part is used to control the flow of hot and cold water into the w...

Washer Washer

★★★★★

(1)

$8.06

This part goes on the agitator retaining bolt.

6 Pin Shift Actuator

★★★★★

(1)

$52.96

This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer trans...

Washer D-Shaped Knob Insert

$11.61

This insert is sold individually. Knob not included. Knob is sold separately.

Washer Lid Hinge Mounting Screw

$12.34

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

Washer Upper Agitator

$96.81

This agitator is for washers. Agitator rotates back and forth to move the clothes inside the tub to clean the load. Unplug the washer before installing this part. Wear work gloves to protect your hands.

Washer Hose Clamp

$11.06

This hose clamp is sold individually.

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 11022342512

Viewing 14 of 14

Will not agitate

Fixed by these parts

How to fix it

Leaking

Fixed by these parts

Noisy and Marks Left on Clothes

Fixed by these parts

How to fix it

Lid or door won’t close

Videos for 11022342512

Viewing 8 of 17

Replacing the Washer Drive Pulley

Replacing the Drive Hub Kit

Replacing the 6 Pin Shift Actuator

Replacing the Gear Case

Replacing the Water Inlet Valve

Replacing the Washer Hose Clamp

Replacing the Door Lock Assembly

Replacing the Washer Sealtub

Installation Instructions for 11022342512 Provided by Fix customers like you

Viewing 3 of 72

Customer:: Allison from RICHFORD, NY
Parts Used:: W10528947
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Hub had warn its grooved teeth off and washer wouldnt agitate

ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned ... Read more

Read less

56 of 74 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: David from BLOOMINGTON, IN
Parts Used:: W10721967
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Socket set

Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.

Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.

58 of 82 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Patricia from MURPHYSBORO, IL
Parts Used:: W11210459
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers

Water would not fill the washer except for 4 inches.

Once we put in the new Water Inlet Valve, the auto sensor works now and I can wash any size load

37 of 50 people found this instruction helpful.

Was this instruction helpful to you?