Models > WFMC220BUC

WFMC220BUC (15) Bosch Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WFMC220BUC

Viewing 4 of 4
Cabinet Assy Diagram and Parts List for 15 Bosch Washer
Cabinet Assy
Control Panel Diagram and Parts List for 15 Bosch Washer
Control Panel
Drum Assy Diagram and Parts List for 15 Bosch Washer
Drum Assy
Pump Assy Diagram and Parts List for 15 Bosch Washer
Pump Assy
Keep searches simple, eg. "belt" or "pump".
Cold Water Inlet Valve – Part Number: 00422244
$55.93
In Stock
Bellow Assembly – Part Number: 00667489
$82.85
This part is also called the Door Boot Seal. It's the main seal between the front bulkhead and the outer tub. It includes the two clamps.
In Stock
Drain Pump - 120V 60Hz – Part Number: 00436440
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
No Longer Available
Hot Water Inlet Valve – Part Number: 00422245
$45.90
In Stock
Leveling Leg – Part Number: 00610643
$12.00
Sold individually.
In Stock
Shock Absorber – Part Number: 00642112
$64.04
Shock absorbers keep the washer from vigorous shaking during it's cycles. They are sold individually.
In Stock
00 Shipping Bolt With Spacer – Part Number: 00175724
$18.05
This part includes 1 shipping bolt, 1 washer and 1 sleeve.
In Stock
Washer Washer Boot Spring Clamp – Part Number: 00648264
$11.79
In Stock
Sleeve – Part Number: 00422204
No Longer Available
SLEEVE – Part Number: 00422174
No Longer Available
Washer Drive Belt – Part Number: 00491680
This drive belt is for washers. Drive belt connects the drive motor to the drive system in the washer to spin the basket.
No Longer Available
CLAMP – Part Number: 00644646
$12.53
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WFMC220BUC

Viewing 3 of 3
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing Fixing
How to fix it
Replacing the Cold Water Inlet Valve

Replacing the Cold Water Inlet Valve

Replacing the Drain Pump - 120V 60Hz

Replacing the Drain Pump - 120V 60Hz

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Sheriann from GLENN, CA
Parts Used:
00436440
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
We got E13 code, meaning "something" is in the pump--needs clean out. We cleaned out and it worked only once more:( A small plastic peice was cracked and let water and "junk" into the pump--a total loss.
My husband took off the back of the washer and disconnected the hose that connected the pump to the main drum. He has strong fingers--did it that way--but really you need a pillars. After putting it all back together we got another weird code--E29 and the door wouldn't lock. But after turning everything off and waiting 30 minutes, the genius machine just suddenly reset itself and started working correctly. No problems since and we've done about 30 loads since then. While on the phone with Bosch, trying to learn how to clear the new code, I heard only, "We only give information to certified repairmen and home repairs are definitely not covered by the warranty." Who cares? I'm now a satisfied mom who is actually washing clothes after only two days waiting for shipping--IF I could get any repairman to my house this month I'd be surprised and not for cheaper than the price of a new washer! Thank you for your great parts:)
Read less
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donna from HUNTERSVILLE, NC
Parts Used:
00422244
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
The inlet valve on my washer was leaking
Turned off the water to the washer. Took the top off of the washer. Used pliers to loosen the rings holding the hoses to the valve. After the hoses were removed from the valve I popped out the old inlet valve. I put the new inlet valve in place and put the hoses and rings back on. Secured the top of washer back on the washer turned the wa ter back on. No leak present.
Read less
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from ENTERPRISE, AL
Parts Used:
00422174
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The sleeves on this model washer are two different sizes see below
The thickness of the sleeves are 3.0 mm thick on the base of the sleeve. However the sleeve on the bottom of both the upper and lower hinges of this model washer are different sizes. The base of the sleeve on the top of each hinge post is 3.0 mm but the sleeve on the bottom post of each hinge is only 1.2 mm thick. The bracket on the d oor that holds all 4 screws to attach the door to the washer will not fit unless you reuse the old sleeve from the lower posts or reduce the thickness of the disc on the lower post to 1.2 mm. I spent hours trying to get the door back on and finally saw why I couldn't get the screws back in because the bracket could not go in place and sit flush the the washer.
Read less
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More