Models > UCG1650L0II

UCG1650L0II General Electric Trash Compactor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for UCG1650L0II

Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
These bags will fit all fifteen inch rectangular trash compactors.
On Order
In Stock
This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is...
In Stock
This power nut is for trash compactor and attaches to the side of the ram and is threaded. As the power screw rotates, it feeds through the power nut pulling the ram down to compact the trash.
In Stock
Used with trash compactors.
No Longer Available
The drawer roller attaches to the bottom of the drawer and allows the drawer to roll in and out.
In Stock
No Longer Available
No Longer Available
No Longer Available
No Longer Available
In Stock
Screws included.
No Longer Available

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for UCG1650L0II

Viewing 4 of 4
Drawer is hard to open and or close
Fixed by these parts
Fixing Fixing
How to fix it
Doesn’t stop at end of compacting cycle
Fixed by these parts
Fixing
How to fix it
Compactor ram gets stuck
Fixed by these parts
Fixing
How to fix it
Won’t stay on
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Brian from HOUSTON, TX
Parts Used:
WC21X20249
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Trash compactor would not shut off at end of cycle. Would have to manually turn it off.
Removed compactor from opening. Using screw driver unthreaded 4 screws from top and then removed the on/off dial. Face plate came off easy and provided access to relay switch bank. Unscrewed two screws which allowed both relay switches to be removed and replaced. Recommend replacing both relay switches. Reassembled and compactor work ed fine. Very easy job. If your compactor is making a machine gun noise during the return cycle then this will solve your problem.
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from joplin, MO
Parts Used:
WC02X20287
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
plastic nut was stripped
replaced drive nuts only problems i had was to adjust shutoff switch
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from GALVESTON, TX
Parts Used:
WC02X20287
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
RAM was crooked. Power Nut was stripped.
Followed YouTube instructions. Was relatively easy to dismantle, though on this GE Profile model compactor, needed to partially undo the front panel to provide room to remove the RAM. Works great now!!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!