Models > 1301695964

1301695964 Snapper Snow Blower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 1301695964

Viewing 9 of 9
Auger drive Diagram and Parts List for Snapper Snow Blower
Auger drive
Auger housing Diagram and Parts List for Snapper Snow Blower
Auger housing
Decals Diagram and Parts List for Snapper Snow Blower
Decals
Discharge chute Diagram and Parts List for Snapper Snow Blower
Discharge chute
Engine & frame Diagram and Parts List for Snapper Snow Blower
Engine & frame
Gear case Diagram and Parts List for Snapper Snow Blower
Gear case
Handles & controls Diagram and Parts List for Snapper Snow Blower
Handles & controls
Traction drive-standard Diagram and Parts List for Snapper Snow Blower
Traction drive-standard
Wheel Diagram and Parts List for Snapper Snow Blower
Wheel
Keep searches simple, eg. "belt" or "pump".
Snow Blower Drive Belt – Part Number: 1733324SM
$19.25
In Stock
Lawn Mower Wing Knob – Part Number: 703065
$7.62
This knob is used on a variety of lawn and gardening equipment and acts as a nut to fasten bolts and stayed secure in your tool. Replace this part if your bolt is loose and needs security. The diamete...
In Stock
Snow Blower Belt – Part Number: 585416MA
$22.94
In Stock
Snow Blower Friction Disc Wheel – Part Number: 1501435MA
$29.97
In Stock
Snow Blower Screw 1/4-20x1.75 – Part Number: 703057
$6.28
In Stock
Snow Blower Bearing And Retainer Assembly – Part Number: 334163MA
No Longer Available
Snow Blower Reversible Shoe Skid – Part Number: 1727854BMYP
$17.18
On Order
Lawn Mower Locknut – Part Number: 703232
$6.26
This hex nut is created for use on lawn and gardening equipment. This is a multi-application nut that depends on the unit and tool you are using. For installation instructions, check the manual provid...
In Stock
Snow Blower Hex Flange Lock Nut – Part Number: 703917
$5.95
Special Order
Snow Blower Screw – Part Number: 704212
$6.00
In Stock
Bearing, Axle – Part Number: 1501114MA
$12.55
In Stock
Lawn Mower Locknut Flange – Part Number: 704067
$5.95
This is a nut for your lawn and garden equipment. The diameter is 5/16 inches with a thread size of 18. The nut has a washer like base, with a wide flange to ensure it will not loosen with heavy vibrations.
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kenneth from ALDAN, PA
Parts Used:
1501435MA, 585416MA, 1733324SM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Refurbishing for next winter season
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More