Models > CGE29DP3TBD1

CGE29DP3TBD1 General Electric Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for CGE29DP3TBD1

Viewing 13 of 13
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
$10.59
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
$93.94
In Stock
This dual water valve is for your refrigerator
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Generoso from Ocala, FL
Parts Used:
WR51X31995, WR55X29875
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
freezer temperature was warm, but freezer evaporator frozen
unplugged the electrical connection from the wall, took out the top and bottom shelves from the freezer (freezer located in the lower part of fridge)
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!