Models > 2216*20

2216*20 Roper Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 2216*20

Viewing 5 of 5
Backguard Diagram and Parts List for Roper Range
Backguard
Body Diagram and Parts List for Roper Range
Body
Main Top Diagram and Parts List for Roper Range
Main Top
Oven Door Diagram and Parts List for Roper Range
Oven Door
Rotisserie Diagram and Parts List for Roper Range
Rotisserie
Keep searches simple, eg. "belt" or "pump".
Range Surface Burner 8 2600w – Part Number: WP660533
$38.61
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
In Stock
Order within the next 3 hrs and your part ships today!
Water Inlet Valve – Part Number: 303650
This water inlet valve is intended for use with under counter style dishwashers. It has a 3/8 of an inch FPT (female pipe thread) valve and a mounting bracket. - This water inlet valve should be loca...
No Longer Available
Door Gasket and Flange Kit – Part Number: 675659
This dishwasher door gasket and flange kit comes with a white door gasket, a flange, ten screws, and an instructions sheet.
No Longer Available
High Limit Thermostat – Part Number: WP303896
$55.53
This thermostat is used for Canadian models only.
In Stock
Order within the next 3 hrs and your part ships today!
Timer – Part Number: Y305020
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
No Longer Available
Washer – Part Number: 303963
No Longer Available
PLATE, TOE – Part Number: 3367470
No Longer Available
WHITE – Part Number: 384287
No Longer Available
DISCONTINUED – Part Number: 675014
$40.18
Special Order
DISCONTINUED – Part Number: 4329164
No Longer Available
xJunction Block – Part Number: 290105
No Longer Available
DISCONTINUED – Part Number: 302285
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 2216*20

Viewing 4 of 4
Element will not heat
Fixed by these parts
Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing
How to fix it
Will not fill with water
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jack from Fort Worth, TX
Parts Used:
303650
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
Leaky water inlet valve
Easy. Removed screws at top holding dishwasher to counter. Turned off water to dishwasher. Unhooked water supply line. Electrical and waste lines were long enough to leave connected and pull dishwasher out, set on side. Pull off electrical connector. Use pliars to compress spring holding water line to dishwasher, remove that line fr om valve. Use nut driver to remove old one, and replace with new one. Teflon tape on water connection to sink. Do everything in reverse.
done.
Read less
18 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Val from La Habra, CA
Parts Used:
Y305020
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
The timer would not shut off the dryer.
I Unplugged the dryer from the electrical outlet. Then took off the top panel. Then removed the nut holding on the selector dial, and removed the selector dial. I then removed the two screws holding the timer to the panel. Then I removed and installed each electrical connector from the defective timer, installing it on the new timer. Then reverse procedure to assemble the dryer.
The best part of the whole experience was the quick service I received from PartSelect. Thank you very much.
Val
Read less
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ryoji from kennewick, WA
Parts Used:
675659
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
water was leaking from the bottom corners
i followed all the directions and it went in very well,although i still had the leak,i visited the parts forum and got a reply that it was the pump outlet gasket,so i an very happy to have gotten some professional help and am glad i replaced the door gasket as it needed it anyway. thanks so much roy
8 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More