Models > 10421-1

10421-1 General Electric Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 10421-1

Viewing 4 of 4
BACKGUARD Diagram and Parts List for General Electric Range
BACKGUARD
CHASSIS Diagram and Parts List for General Electric Range
CHASSIS
COOKTOP GROUP Diagram and Parts List for General Electric Range
COOKTOP GROUP
STEEL DOOR GROUP Diagram and Parts List for General Electric Range
STEEL DOOR GROUP
Keep searches simple, eg. "belt" or "pump".
Range Burner Bowl 8 – Part Number: WB31T10015
$17.85
This burner bowl, also known as a drip bowl, is an authentic OEM part for your electric range or cooktop. This part is black in color and designed to fit under the 8-inch coiled burner elements and is...
In Stock
Range Burner Bowl 6 – Part Number: WB31T10014
$16.49
This genuine OEM burner bowl, also known as a drip tray, is black and color and measures 6 inches in diameter. It is designed to be used under the coiled elements on an electric stove or range, in ord...
In Stock
Range Door Handle End Cap – Part Number: WB7X7183
$25.88
This authentic OEM part is an end cap for the door handle on your oven. It is black in color, made of plastic, can be used on either the left or right-hand side of the handle, and is sold individually...
In Stock
Range Handle End Cap – Part Number: WB07K10043
$39.19
This white end cap is sold individually. One cap is required for each end of the oven door handle.
In Stock
Door Handle – Part Number: WB15X10018
$35.21
This is just the handle. The end caps for this handle must be ordered separately if needed.
In Stock
Washer - 12 Pack – Part Number: WB1X119D
$12.78
In Stock
Leveling Leg – Part Number: WB2X8248
No Longer Available
Door Gasket – Part Number: WB2X2058
$131.96
In Stock
ELEMENT BROIL - WB44M166 – Part Number: WG02F05470
No Longer Available
SCREW – Part Number: WR2X9260
$27.87
Special Order
TERM BLOCK LONG LEADS - WB2M2261 – Part Number: WG02F05807
No Longer Available
HINGE REG – Part Number: WG02L02131
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 10421-1

Viewing 2 of 2
Element will not heat
Fixed by these parts
How to fix it
Door won’t close
Fixed by these parts
Fixing
How to fix it
Replacing the Range Burner Bowl 6

Replacing the Range Burner Bowl 6

Replacing the Range Burner Bowl 8

Replacing the Range Burner Bowl 8

Replacing the Range Door Handle End Cap

Replacing the Range Door Handle End Cap

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Harry from Thomasville, GA
Parts Used:
WB7X7183
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The end caps broke on my oven door handle.
1st I opened the oven door and removed the 2 screws that hold the outside and inside of the door together. With the door separated I removed the 2 screws that hold the end caps in place, then removed the old end caps. I put the new end caps on the oven door handle, aligned the holes for the end cap screws and reinstalled the screws,then reinstalled the oven door screws,closed the oven door and started cooking.
Read less
45 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JoAnn from Auburn, WA
Parts Used:
WB2X2058
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The gasket needed to be replaced in top oven, it was brittle and broken.
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove enti re oven from cabinet and loosen bolts in the back. But, we were able to get enough space to get the old gasket out and new one installed. We did use a 1/4" thick piece of wood on face of oven to prevent any denting of oven when prying out the liner of the oven.
Read less
19 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Columbia, MD
Parts Used:
WB07K10043
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Oven Door Bracket Broke
After several temporary fixes, one of the end caps finally broke completely, so the handle fell off. Ordered both caps, they arrived remarkably fast, and were installed easily.
14 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More