This thermal release valve is for pressure washers.
Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal oper...
This is an OEM detergent suction kit, also referred to as a chemical injection kit, for a pressure washer. This kit is threaded into the pump assembly and is connected to the chemical siphon tube that...
(25 ft., 3000 psi)
This water hose is for pressure washers.
Water hose carries water from the pump to the spray wand.
Wear work gloves to protect your hands when installing this part.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cecil
March 9, 2024
Will the Thermal Relief Valve cause the pump to lock up and stop the engine ? After a few minutes, I release the pressure on the hose then it fires right up and does great for a few minutes then does the same thing again. It seems like the pump is building too much pressure and causing the engine to stop ....
For model number UT80993E
Hi Cecil, thank you for reaching out. Yes, the issue could be with the thermal relief valve, part number FIX9995931. It attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal operating temperatures. It opens and releases the water and pressure from the pump so it will not be damaged. You may need to replace it to fix the issue. We hope that helps!
Repair was easy, however had to u tube issue for proper orientation of parts as it did not come with any instructions. Wished I had two as shipping was twice as much as part. Very satisfied.