Models > 11061632612

11061632612 Kenmore Dryer

Jump to:

Find Part by Name

Most Popular Parts for 11061632612

Dryer Drum Support Roller

$18.80

This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. This part is sold separ...

Dryer Tri Ring

$13.37

This small but mighty OEM piece is called a tri-ring and is used to support the drum roller shaft and the idler pulley shaft in your dryer. It helps to provide a tight seal between components by evenl...

Dryer Thermostat Internal bias

★★★★★

(2)

$29.30

The internal-bias thermostat, also know as a thermistor, is used to prevent the dryer from overheating. It does this by monitoring and controlling the temperature of the inside of the dryer drum. If ...

Washer Leveling Foot

$11.88

It is important for your dryer to be properly leveled, as an unleveled one can cause excessive vibration and noise when operating, may not drain properly, and can cause excessive wear on various parts...

Idler Pulley w/Bracket

$25.95

If your dryer is not tumbling, will not start, or is excessively noisy while operating, there may be an issue with your idler pulley. The idler pulley works by maintaining a constant tension on the dr...

Refrigerator Touchup Paint (White)

$8.40

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...

Dryer Screw 1016 X 1

$8.33

This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer ...

Air Conditioner Cover Screw

$7.93

This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...

Washer D-Shaped Knob Insert

$11.61

This insert is sold individually. Knob not included. Knob is sold separately.

Dryer Blower Wheel

★★★★★

(1)

$58.18

The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over ...

Refrigerator Screw

$8.29

Metallic screw that is less than an inch long. Does not include the plastic washer.

Dryer Drum Support Shaft

$52.53

Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 11061632612

Viewing 9 of 9

Noisy

Fixed by these parts

How to fix it

Not Heating

Fixed by these parts

Touchpad does not respond

Fixed by these parts

How to fix it

Marks left on clothes

Videos for 11061632612

Viewing 8 of 10

Replacing the Dryer Drum Support Roller

Replacing the Dryer Thermostat Internal bias

Replacing the Idler Pulley w/Bracket

Replacing the Washer Leveling Foot

Replacing the Dryer Drum Support Shaft

Replacing the Dryer Tri Ring

Replacing the Dryer Spring

Replacing the Dryer Drum Support Roller Shaft Right Hand Threads

Installation Instructions for 11061632612 Provided by Fix customers like you

Viewing 3 of 75

Customer:: John from Tucson, AZ
Parts Used:: WPW10314173, WPW10359272, W11236646, WPW10512946
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers, Wrench (Adjustable)

worn out part

The repair was fairly easy. The most timely part of the repair was removing the twelve screws from the back panel to expose the repair.

44 of 64 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jim from Tucson, AZ
Parts Used:: WP8577274
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers, Socket set

Unit would shut down in the middle of cycle and flash E1 trouble code

Had to remove the back of unit to access the area of subject part by removeing 12 to 14 screws also the gas line had to be removed. Two screws held the part in place. Unit now runs normal.Saved alot on repair costs!!!!!

30 of 41 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: joe from cheswick, PA
Parts Used:: WP697772
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

craked blower motor

somthing fell down in the blower motor compartment and busted up the bloewr motor fan,and was making noise and out of balance.i changed the blower motor and runs like a charme

63 of 142 people found this instruction helpful.

Was this instruction helpful to you?