Models > GFDS350EL1WW

GFDS350EL1WW General Electric Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GFDS350EL1WW

Viewing 6 of 6
BLOWER & MOTOR Diagram and Parts List for General Electric Dryer
BLOWER & MOTOR
CABINET & TOP PANEL Diagram and Parts List for General Electric Dryer
CABINET & TOP PANEL
CONTROL PANEL Diagram and Parts List for General Electric Dryer
CONTROL PANEL
DOOR Diagram and Parts List for General Electric Dryer
DOOR
DRUM Diagram and Parts List for General Electric Dryer
DRUM
FRONT PANEL Diagram and Parts List for General Electric Dryer
FRONT PANEL

Manuals & Guides for GFDS350EL1WW

Click to download
Install
Installation Instructions
(1.54MB)
Manual
Owner's Manuals
(6.36MB)
Keep searches simple, eg. "belt" or "pump".
Drive Belt – Part Number: WE03X29897
$36.44
This 89.5-inch drive belt is for dryers. It has a 4-rib design on the inside for a better grip. If comparing the size of your current belt to the new one, keep in mind that a small amount of stretchin...
In Stock
Order within the next 4 hrs and your part ships today!
Dryer Light Bulb – Part Number: WE05X20431
$9.21
If the lightbulb inside your dryer drum has burned out, this is an authentic OEM replacement. It is a 10W, 120V bulb that is sold individually. The bulb turns on when the dryer door is open and should...
In Stock
Order within the next 4 hrs and your part ships today!
DRYER BEARING SLIDE GREEN 2PK – Part Number: WE03X37317
$30.27
This single drum bearing slide is an OEM approved replacement part for dryers. It can also be known as a bearing drum slide, pad, or glide. The slides attach to the inner most slots on the front beari...
In Stock
Order within the next 4 hrs and your part ships today!
Dryer Door Latch – Part Number: WE1M1011
$11.34
This Genuine OEM door latch is designed for use with a wide range of GE clothes dryers. Constructed from a combination of durable metal and plastic, the latch is mounted onto the dryer frame to secure...
In Stock
Order within the next 4 hrs and your part ships today!
Dryer Drum Bearing Sleeve – Part Number: WE1M462
$24.20
Keep your GE dryer running smoothly with this genuine OEM rear drum bearing sleeve, designed specifically for GE dryer models. This part supports the back of the dryer drum and helps reduce friction a...
In Stock
Order within the next 4 hrs and your part ships today!
Dryer Door Strike – Part Number: WE1X1192
$8.52
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
In Stock
Order within the next 4 hrs and your part ships today!
Dryer Retainer O-Ring – Part Number: WE1M461
$8.97
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
In Stock
Order within the next 4 hrs and your part ships today!
Dryer Door Switch – Part Number: WE4M415
$31.08
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
In Stock
Order within the next 4 hrs and your part ships today!
Adjustable Leveling Screw – Part Number: WE1M642
$16.44
The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able...
In Stock
Order within the next 4 hrs and your part ships today!
Dryer Inlet Control Thermostat – Part Number: WE4M398
$37.20
This part is located on the housing for the heating element.
In Stock
Order within the next 4 hrs and your part ships today!
High Limit Thermostat - L315-65 – Part Number: WE4M137
$82.93
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
In Stock
Order within the next 4 hrs and your part ships today!
Nut – Part Number: WE2M96
Nut
$9.37
In Stock
Order within the next 4 hrs and your part ships today!
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for GFDS350EL1WW

Viewing 9 of 9
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Marks left on clothes
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Drum Not Spinning
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Won’t Start
Fixed by these parts
Fixing Fixing
How to fix it
Not Heating
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door Pops Open
Fixed by these parts
Fixing Fixing
How to fix it
Too hot
Fixed by these parts
Fixing
How to fix it
Heat stays on after drum has stopped
Fixed by these parts
Fixing
How to fix it
Replacing the Adjustable Leveling Screw

Replacing the Adjustable Leveling Screw

Replacing the Drive Belt

Replacing the Drive Belt

Replacing the Dryer Moisture Sensor

Replacing the Dryer Moisture Sensor

Replacing the Dryer Drum Bearing Sleeve

Replacing the Dryer Drum Bearing Sleeve

Replacing the Dryer Heating Element & Housing Assembly

Replacing the Dryer Heating Element & Housing Assembly

Replacing the Dryer Light Bulb

Replacing the Dryer Light Bulb

Replacing the Dryer Retainer O-Ring

Replacing the Dryer Retainer O-Ring

Replacing the Dryer Door Strike

Replacing the Dryer Door Strike

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Adrian from Middletown, MD
Parts Used:
WE03X29897
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Drum belt broke
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
This was a first attempt ever at fixing an appliance and it was no big deal.
201 of 294 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joshua from Dallas, TX
Parts Used:
WE4M415
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
Dryer would not start
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a pow er fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
Read less
89 of 136 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
robert from mount joy, PA
Parts Used:
WE1M1011, WE1X1192
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
dryer door wont stay shut
pulled out door striker anddoor latch out with pliers and just pushed in new parts. works like new in under a min.
80 of 120 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More