Models > CLZ8560ADB > Instructions

CLZ8560ADB Magic Chef Cooktop - Instructions

Jump to:

All Instructions for the CLZ8560ADB
1 - 15 of 22
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Frank from Pierce, ID
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The grommets came apart metal from rubber.
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.
23 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
joseph from wildomar, CA
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
range top loose, grommets missing
very easy to push each grommet into range top holes
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Albert from Clewiston, FL
Parts Used:
74003327
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
burner would not light
saw burner tube was completely rusted at end and would not line up with burner. decided to go ahead and replace all three tubes. was easy to install, able to get a good cleaning job on unit in the process. works fine, wife is happy and that is what matters in a motorhome.
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
DAVID from SEARCY, AR
Parts Used:
74003944
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Inside Of Knob Busted Out, Would Not Turn Ignitor.
Actually too simply to list as diy job. Merely remove old knob and push new one onto spindle.
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Hal from National City, CA
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
missing gromet
Pushed into hole by hand, really simple
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alta from Rexford, MT
Parts Used:
12002826
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
existing grates were very worn.
Just ordered a new grate. Everyother place I talked to said the one piece grate would not fit, so I am very pleased with the service you offered.
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brady from CARYVILLE, FL
Parts Used:
74003944
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
igniter knob for gas stove stripped out
Slip old knob off slide new knob on, be sure to align knob properly your done
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Fred from Spring, TX
Parts Used:
WPW10308285
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Bushings were worn out
The parts were exactly correct. The website was complete and easy to use. The reair was a snap.
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from ARCHER, FL
Parts Used:
74002413
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Wouldn't ignite
Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenneth from Lakewood, NM
Parts Used:
74007287
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Finish errosion
Replaced with new part
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Niland, CA
Parts Used:
74002413, WP5111A719-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Igniter failed
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.
2 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harvey from Lynchburg, TN
Parts Used:
74003944
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob would not turn igniter.
Simple off/on installation.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Martin from Millersburg, MI
Parts Used:
Y8007P02060
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Lost on of the Rubber Grommet holding the stove grate
So simple would be embarrassed to give any instructions; it is so self evident.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Henry from Omaha, NE
Parts Used:
Y8007P02060, 74003944, 74003327
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Front flashtube extension rusted through, ignition knob stripped, rubber grommet missing
Removed screws from igniter cover, removed and replaced fron extension tube. Removed old knob and replaced. Replaced missing grommet. Saved other extension tubes as the old ones were still serviceable.
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from mount vernon, WA
Parts Used:
74003327
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
flashtube was burned off
put in new flashtube
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CLZ8560ADB
1 - 15 of 22