Models
>
5508
5508
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 5508
Click on the best match to narrow your results.
- 5508-0 Briggs and Stratton Generator (T4019, 4,000 Watt Portable Generator)
- 5508-0-T4019 Briggs and Stratton Generator (5508-0 - T4019, 4,000 Watt)
- 55080 Hunter Ceiling Fan (Cedar Key Outdoor Low Profile With Led Light 52 Inch. Matte Black - Barnwood)
- 55083 (55083) Ridgid Pipe Tools (Portable Pipe Beveller With 45° Cutter Head, 120v)
- 55085 Hunter Ceiling Fan (Searow Outdoor With Led Light 54 Inch. Matte Silver - Matte Silver)
- 55086 Hunter Ceiling Fan (Searow Outdoor With Led Light 54 Inch)
- 55088 (55088) Ridgid Pipe Tools (Portable Pipe Beveller With 30° Cutter Head, 120v)
Exact Part matches for your search term
Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
In Stock
$19.38
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the f...
In Stock
In Stock
Special Order
Special Order
In Stock
On Order
In Stock
In Stock
In Stock
In Stock
Special Order
Common Problems and Symptoms for 5508
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from PICAYUNE, MS
- Parts Used:
- 192980GS
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from RADFORD, VA
- Parts Used:
- 192980GS
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers
install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole
install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank ... Read more r />
used same technique to insert valve upward into bushing
works great!
install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole
install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank ... Read more r />
used same technique to insert valve upward into bushing
works great!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from LEES SUMMIT, MO
- Parts Used:
- 192980GS
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
major gas leak on my generator
popped out the old-----the bushing failed. replaced as per the included instructions
Was this instruction helpful to you?
Thank you for voting!