Models
>
5506
5506
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 5506
Click on the best match to narrow your results.
- 5506 Braun Shaver Razor (Flex Integral)
- 5506-0 Briggs and Stratton Generator (T4016, 4,000 Watt Portable Generator)
- 5506-0-T4016 Briggs and Stratton Generator (5506-0 - T4016, 4,000 Watt)
- 55060 Hamilton Beach Beverage Dispenser
- 550600 Jet Sander (Jet 550600 Parts)
- 550601 Jet Sander (Jet 550601 Parts)
- 550602 Jet Sander (Jet 550602 Parts)
- 550603 Jet Sander (Jet 550603 Parts)
- 550604 Jet Sander (Jet 550604 Parts)
- 550605 Jet Sander (Jet 550605 Parts)
- 550610 Jet Riveter (Jet 550610 Parts)
- 550611 Jet Riveter (Jet 550611 Parts)
- 550612 Jet Riveter (Jet 550612 Parts)
- 550620 Jet Hammer (Jet 550620 Parts)
- 550621 Jet Hammer (Jet 550621 Parts)
- 550622 Jet Hammer (Jet 550622 Parts)
- 550623 Jet Hammer (Jet 550623 Parts)
- 550640 Jet Hammer (Jet 550640 Parts)
- 550641 Jet Hammer (Jet 550641 Parts)
- 550642 Jet Hammer (Jet 550642 Parts)
- 550643 Jet Hammer (Jet 550643 Parts)
- 550644 Jet Hammer (Jet 550644 Parts)
- 550645 Jet Hammer (Jet 550645 Parts)
- 550660 Jet Brake & Press (Jet 550660 Parts)
- 550661 Jet Brake & Press (Jet 550661 Parts)
- 55067 Troy-Bilt Tiller (Tiller Frame Weights - Tuffy)
- 550670 Jet Drill (Jet 550670 Parts)
- 550680 Jet Grinder (Jet 550680 Parts)
- 55069 Hunter Ceiling Fan (Panama 54 Inch)
Exact Part matches for your search term
Viewing 5 of 5
This part number matches the current model number 5506
No Longer Available
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
In Stock
Special Order
In Stock
On Order
$19.38
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the f...
In Stock
Special Order
In Stock
In Stock
In Stock
Special Order
Common Problems and Symptoms for 5506
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from PICAYUNE, MS
- Parts Used:
- 192980GS
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from RADFORD, VA
- Parts Used:
- 192980GS
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers
install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole
install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank ... Read more r />
used same technique to insert valve upward into bushing
works great!
install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole
install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank ... Read more r />
used same technique to insert valve upward into bushing
works great!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from LEES SUMMIT, MO
- Parts Used:
- 192980GS
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
major gas leak on my generator
popped out the old-----the bushing failed. replaced as per the included instructions
Was this instruction helpful to you?
Thank you for voting!