Cub Cadet Lawn Mower Parts

Start With Your Model Number

Need help finding your model number?

Find Parts Fast

Guaranteed Fit

Repair Videos

Popular Cub Cadet Lawn Mower Parts

Element- Air Cleaner

$7.06

In Stock

Add to cart

★★★★★

★★★★★

2 Reviews

Fix Number

FIX9903219

Manufacturer Part Number

17211-ZL8-023

To ensure your engine is protected, it is vital that the air filter is inspected regularly and replaced according to the manufacturer recommendations. This filter helps to prevent dirt and dust from making its way into the carburetor and damaging the engine. If the engine is not functioning as it should, this should be one of the first parts you check. To inspect the filter, you will need to remove the air cleaner cover, and lift the filter out of place to remove.

Installation Instructions

michael from pikeville, KY

none

i watched how i took off the old parts... Read more...

Bow Tie Cotter Pin

$3.99

In Stock

Add to cart

Fix Number

FIX9096195

Manufacturer Part Number

714-04040

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.

Watch the install video

Mulching Blade

$31.74

In Stock

Add to cart

Fix Number

FIX9169783

Manufacturer Part Number

942-0741A

This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces along the edges of the blade. If installed correctly this part will keep the grass clipping under the deck longer, and re-cut them. The blade is 21 inches long, and sold individually.

Fixes these symptoms

• Mower blade does not cut
• See more...

Nut, Flange Lock, 5/16-18, Grf

$4.10

In Stock

Add to cart

Fix Number

FIX9092936

Manufacturer Part Number

712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Carburetor Gasket

$4.99

In Stock

Add to cart

Fix Number

FIX9899150

Manufacturer Part Number

16228-ZL8-000

This is a carburetor gasket and is sold individually. If your engine is running rough, it could be due to a worn or damaged gasket. The gasket is meant to provide an air tight seal, to help protect the engine. This gasket should be replaced when repairing the carburetor. When removing this part, it is advised to clean the surfaces around the carburetor gasket before installing the new one.

Gasket- Carburetor

$4.99

In Stock

Add to cart

Fix Number

FIX9899099

Manufacturer Part Number

16221-883-800

Gasket- Insulator

$7.97

On Order

Add to cart

Fix Number

FIX9899073

Manufacturer Part Number

16212-ZL8-000

Sold individually, this insulator gasket is sourced directly from the manufacturer and is for small engines. This part acts as a seal between the cylinder housing and the carburetor insulator. This airtight seal is created to ensure contaminants do not make their way to the carburetor. It may become obvious that this part needs to be replaced if the engine keeps stalling or is running rough.

Watch the install video

Bell Blade Support

$6.15

In Stock

Add to cart

Fix Number

FIX17016260

Manufacturer Part Number

736-0524B-1

This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made of metal to ensure a long life. If there is visible damage or wear, replace this part.

Installation Instructions

Michael from Lillian, AL

Blade became warped over time, baffle was falling down

In order to change the blade in a push mower you need to use a 2x4 or equivalent to stop the blade from spinning. I bent the blade back previously by heating it up but I think it was causing too much vibration so I got a new blade after hitting stumps over the years. I run some things into the ground. The spark plug is amazing and really high quality. Its a simple change. The drive belt is also a simple change, any 6 in 1 if you remove the screw heads will have the right nut sizes for most mower parts. Always lube up the belt "like two drops" with a little belt oil and it will last longer. I use diesel oil, 3 n 1, or chain saw bar lube oil. The tensioner for the belt is an easy adjustment. This model is also prone to fuel lines being blocked. Just detach the fuel line, blow it out with your mouth, and reattach. Have had it happen twice in 10 years, some people would be pulling spark plugs, diagnosing the engine, etc, its pretty easy, just put some fuel on the carb to see if your getting fuel blockage. Read more...

Nut, Flange Lock, 1/4-20, Grf

$4.19

In Stock

Add to cart

Fix Number

FIX9299574

Manufacturer Part Number

712-04064

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.

Plastic Bushing .380 ID

$4.31

In Stock

Add to cart

Fix Number

FIX9167515

Manufacturer Part Number

941-0475

This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventually wear out. When that happens, you must replace it. Before making this repair, we recommend letting your machine cool, and draining the gas tank.

Appliance Type

• Lawn Mower Parts
• Cub Cadet Parts

Related Pages

• Cub Cadet Lawn Mower Brackets and Flanges
• Cub Cadet Lawn Mower Caps and Lids
• Cub Cadet Lawn Mower Carburetors
• Cub Cadet Lawn Mower Dipsticks
• Cub Cadet Lawn Mower Engines
• Cub Cadet Lawn Mower Filters
• Cub Cadet Lawn Mower Hardware
• Cub Cadet Lawn Mower Hoses and Tubes
• Cub Cadet Lawn Mower Seals and Gaskets
• Cub Cadet Lawn Mower Springs and Shock Absorbers
• Cub Cadet Lawn Mower Starters

Popular Cub Cadet Lawn Mower Models

• 300 ((12ABB22J756)(2016)) Sc Hw
• 300 ((55RK6HNR050)(2019)) Pro Hw 300 336 (55rk6hnr050) (2019)
• 300 ((55RI6HNS050)(2018)) Pro Hw 300 348 (55ri6hns050) (2018)
• 300 ((55RI6HNS050)(2019)) Pro Hw 300 348 (55ri6hns050) (2019)
• 300 ((55RI6HNV050)(2019)) Pro Hw 300 354 (55ri6hnv050) (2019)
• 300 ((55RK6HNR050)(2018)) Pro Hw 300 336 (55rk6hnr050) (2018)
• 300 ((55RI6HNV050)(2018)) Pro Hw 300 354 (55ri6hnv050) (2018)
• 300 ((12ABB22J709)(2016)) Sc Hw
• 600 ((12ACW62R710)(2016)) Cc Self Propelled Walk Behind Mower
• 600 ((52A-399O100,52A-399O101)) Rb
• 600 ((53RL8CSU050)(2021)) Pro X 600 Kw Efi 660 (53rl8csu050) (2021)
• 600 ((53AI8CSA050)(2021)) Pro X 600 Kw 654 (53ai8csa050) (2021)
• 600 ((53AI8CSU050)(2021)) Pro X 600 Kw 660 (53ai8csu050) (2021)
• 600 ((53RL8CSA050)(2021)) Pro X 600 Kw Efi 654 (53rl8csa050) (2021)
• 600 ((53AI8CSF050)(2021)) Pro X 600 Kw 648 (53ai8csf050) (2021)
• 600 ((53AI8CSA050)(2020)) Pro X 600 Kw 654 (53ai8csa050) (2020)
• 600 ((53RZ3CSB050)(2021)) Pro X 600 Kw 636 (53rz3csb050) (2021)
• 600 ((12ACW62R756)(2016)) Cc Self Propelled Walk Behind Mower
• 600 ((53AI8CSF050)(2020)) Pro X 600 Kw 648 (53ai8csf050) (2020)
• 600 ((53AI8CSU050)(2020)) Pro X 600 Kw 660 (53ai8csu050) (2020)