Craftsman Lawn Mower Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Craftsman Appliance Parts
Shop By Appliance Type Shop By Part Type

Popular Craftsman Lawn Mower Parts

Lawn Tractor Mandrel Assembly – Part Number: 587819701
Lawn Tractor Mandrel Assembly
$48.56
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX12087499
Manufacturer Part Number
587819701

Installation Instructions

Terrence from LORENA, TX
Blade mandrel replacement
1. Remove mower deck.
2. Remove mower blade from defective mandrel.
3. Clean caked up grass from underside of mower deck.
4. Remove belt pulley from top of defective mandrel.
5. Remove four bolts fastening defective mandrel to deck. Note: bolts will most likely shear - make sure you have new ones.
6. Install new mandrel to deck using four new self-tapping bolts.
7. Reinstall mower blade to new mandrel assembly.
8. Reinstall belt pulley to new mandrel assembly.
9. Reinstall mower deck to tractor. Read more...
Bearing – Part Number: 532009040
Bearing
$6.21
In Stock
Fix Number
FIX9006914
Manufacturer Part Number
532009040
This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually but two are needed for each front wheel. It is recommended that they be replaced at the same time. Install this part with the flat side facing the grease zerk in the rear side of the wheel.
Ring Klip Number T5304-75 – Part Number: 812000029
Ring Klip Number T5304-75
$3.99
In Stock
Fix Number
FIX9143890
Manufacturer Part Number
812000029
This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part of a mower wheel or steering assembly). When it is installed, the part that is visible acts as a shoulder, holding the specific component or assembly together. This very small metal ring clip (approximately 1-inch by 1-inch) is sold individually.
Cap Axle Black 1 50 x 1 00 – Part Number: 532104757
Cap Axle Black 1 50 x 1 00
$3.99
In Stock
Fix Number
FIX9007667
Manufacturer Part Number
532104757
This is an OEM axle cap for lawn tractors and is sold individually. It stops debris from getting into the wheel hub and axle. This axle cap is prone to wear and tear and should be replaced when it is goes missing or appears damaged. No tools are necessary for this easy repair, simply locate the cap axle on the rim of the wheel and remove.
Wheel and tire assembly (Front Drive Wheels) – Part Number: 583719501
Wheel and tire assembly (Front Drive Wheels)
$27.67
Special Order
★★★★★
★★★★★
3 Reviews
Fix Number
FIX11971248
Manufacturer Part Number
583719501
This is a genuine OEM sourced replacement part is used with walk behind lawn mowers. This is the drive wheel which has plastic gears on the inside. It is designed to be driven by a pinion gear which is sold separately. If the wheel is broken or damaged it should be replaced to ensure smooth ride and consistent cut of the grass. Includes one (1) plastic wheel.
Bolt and Washer Assembly – Part Number: 532193003
Bolt and Washer Assembly
$8.71
On Order
Fix Number
FIX9020856
Manufacturer Part Number
532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
Wheel – Part Number: 589527301
Wheel
$4.99
In Stock
Fix Number
FIX12630280
Manufacturer Part Number
589527301
Wheel.gage.half.spoked
Blade Mower Hi Lift – Part Number: 532405380
Blade Mower Hi Lift
$23.87
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX9017804
Manufacturer Part Number
532405380
This is a manufacturer-approved high quality replacement blade for a lawn tractor and is sold individually. It is used on 46-inch decks, and measures approximately 22-1/2 inches long and 2-3/4 inches wide. This blade is a high-lift blade (2-in-1 blade), meaning it is designed with curved tips that lift grass clippings up and out through the discharge chute into a grass bag (if applicable). By replacing a dull, bent, or damaged blade, this will ensure a better quality cut. For this repair, you will need a wrench to remove the blade bolt, and we recommend wearing gloves to protect your hands.
Bow Tie Cotter Pin – Part Number: 714-04040
Bow Tie Cotter Pin
$3.99
In Stock
Fix Number
FIX9096195
Manufacturer Part Number
714-04040
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Washer 25/32 x 1-1/4 x 16 Ga.
$3.99
In Stock
Fix Number
FIX9008998
Manufacturer Part Number
532121749
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to spread the load under a bolt or screw. It also helps to reduce heat and friction as the fastener is tightened. This repair may require a screwdriver or socket wrench, depending on the fastener for your model. This is a single flat washer; the fasteners are sold separately.

Appliance Type

Related Pages

Popular Craftsman Lawn Mower Models

View More
+