Kenmore Dishwasher Spray Arms

Kenmore Appliance Parts

Popular Kenmore Dishwasher Spray Arms

Lower Spray Arm
$35.44
In Stock
★★★★★
★★★★★
4 Reviews
Fix Number
FIX12585623
Manufacturer Part Number
5304517203
This is a single lower spray arm found in dishwashers to spray water and detergent vigorously over the dishes. This spray arm is made of plastic, so can warp or crack with time. The holes in the spray arm can get clogged with debris, so it should be cleaned every so often. If it is beyond cleaning or damaged, it will need to be replaced. If the holes are clogged, this can sometimes mean there is a problem with the filter system, so it is a good idea to inspect this as well. For this repair, start by turning off the water supply to the dishwasher. Pull the lower rack out of the dishwasher and out of the way. Remove the lower wash arm. Using a flathead screwdriver, push the small locking tabs located on each side at the bottom of the spray arm. You should now be able to easily pull the spray arm out of the dishwasher. Align the new lower wash arm and push it down to secure it in place. Make sure it can spin freely and is not making contact with the heating element. Place the lower dishrack back into the appliance and close the door.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX382824
Manufacturer Part Number
675808
The spray arm works by rotating to distribute water throughout the dishwasher, ensuring that both racks of dishes come out clean. If your dishes are not coming out of the dishwasher as clean as they should be, it may be time to replace the spray arm in your appliance. This kit comes with the upper spray arm, split ring seal, water supply tube, a holder for the tube, and a screw to attach the arm to the mounting bracket. The kit has been redesigned by the manufacturer and no longer includes the upper support or mount, and the supply tube now comes as one piece. If your repair also requires a new mounting bracket, this part can be ordered separately. As this is a genuine OEM parts kit, it is guaranteed to work with your model number. This repair is easy to complete and only requires the use of a Philips screwdriver. The spray arm measures approximately 18 inches long, and all components of the kit are white in color.
Fixes these symptoms
Middle Spray Arm
$50.03
In Stock
Fix Number
FIX11755664
Manufacturer Part Number
WPW10498900
This is a replacement middle spray arm in your dishwasher. You will find your middle spray arm mounted on the bottom of the middle dish rack. The upper spray arm rotates and sprays water during the operating cycle. If your dishes are not coming out of the dishwasher clean, you may have a malfunctioning middle spray arm. Debris and hard water buildup in your dishwasher can cause the middle spray arm to clog. To replace the spray arm, simply turn the arm counter clockwise to release it from the dish rack. Screw in the new spray arm to complete the repair. This part is sold individually.
Fixes these symptoms
★★★★★
★★★★★
1 Review
Fix Number
FIX11746245
Manufacturer Part Number
WP8539324
This genuine OEM upper spray arm mount is used to hold the spray arm to the top rack in your dishwasher. This part is made of plastic and has been redesigned by the manufactured so it may look different than the part you are replacing. This new version no longer needs to be screwed onto the top rack, it simply clips into place. To do this repair, you will need to remove the rack from the dishwasher by removing the rail stop clips. Once the top rack is on a suitable work surface, you will need a Philips screwdriver in order to remove the spray arm and the old, damaged mounting bracket. Once the new mount has been snapped into place, you can reinstall the other parts and place the rack back into your dishwasher.
Fixes these symptoms
Upper Spray Arm
$36.21
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11770483
Manufacturer Part Number
5304506516
The upper spray arm is found above the top rack in your dishwasher. If your dishes are not properly cleaned after the cycle has finished, the spray arm may need to be replaced. As the part is made of plastic, it can crack or disintegrate over time. Replacing this OEM part is a simple repair that does not require any tools. Remove the rail stop clips from the top rack rails, and then remove the top rack from the dishwasher. With the rack out of the way you will be able to access the upper spray arm. Unthread the nut holding the spray arm to the ceiling of the dishwasher, and remove the damaged spray arm. Line up the new spray arm, and begin to thread the part onto the inlet tube. The nut should be firmly tightened so that there are no leaks, and the spray arm should be able to spin freely. The top rack can be placed back inside the dishwasher, and the rail stops reattached.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
★★★★★
★★★★★
1 Review
Fix Number
FIX11741334
Manufacturer Part Number
WP3376846
This genuine OEM seal fits under the lower spray arm in your dishwasher. It is also known as a bearing ring and is used to create a seal between the spray arm and the sump housing. The part measures approximately 2 inches in diameter, is made of a white plastic, and has been purposely designed with the split in the ring. No tools are required to replace the seal, simply remove the lower rack in the dishwasher and unscrew the nut holding the lower spray arm in place.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
Fix Number
FIX11745480
Manufacturer Part Number
WP8268873
This genuine OEM nut is used to hold the lower spray arm in place. The lower spray arm is found at the bottom of the dishwasher, and you will need to remove the bottom dish rack in order to replace the nut. Some signs that you may need to replace this part are if the spray arm is coming loose or falling off, or if the nut is missing or damaged. No tools are required to replace the part. If the old nut is still in place, simply twist it counterclockwise to remove it then twist the new one into place.
★★★★★
★★★★★
1 Review
Fix Number
FIX11747064
Manufacturer Part Number
WP9742946
This authentic OEM part is a wash arm bearing ring for your dishwasher. The bearing ring works in conjunction with the bearing nut to hold the lower spray arm in place. A sign you may need to replace the bearing ring is if the lower spray arm is wobbly when spinning. Over time the bearing ring can become cracked, chipped, or warped and will need to be replaced. No tools are required for this repair, simply remove the lower rack from the dishwasher and then unscrew the bearing nut. Remove the damaged bearing ring and drop the new one in place. The bearing nut can be twisted back in, and the dishrack put back in place.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
Spray Arm
$50.49
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11752757
Manufacturer Part Number
WPW10320512
This is a replacement spray arm for your dishwasher. It is approximately 20 inches wide. This spray arm is made of gray plastic and is sold individually. The spray arm rotates and sprays water to clean your dishes. The spray arm can occasionally become clogged and damaged, and this can prevent your dishes from being cleaned properly. To replace the spray arm, turn clockwise to release, and attach the new arm by connecting it to the nozzle and turning counter clockwise. This is an authentic OEM part.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
Spinner Kit
$29.58
In Stock
Fix Number
FIX972316
Manufacturer Part Number
8193983
This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
Fixes these symptoms

Related Parts