Norge Cooktop Parts
Find Parts Fast
Guaranteed Fit
Repair Videos
![Fix.com search Fix.com search](/images/fix-couple.png)
![Norge Appliance Parts](https://fixcom-g4bhetdmcgd9b7er.z01.azurefd.net/images/brands/250/norge.png)
Popular Norge Cooktop Parts
- Fix Number
- FIX11750107
- Manufacturer Part Number
- WPW10196405
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Henry from St Louis, MO
Replace old drip Bowls
Remove heating elements, remove old drip bowl, install new drip bowls replace heating elements.
Read more...
- Fix Number
- FIX2366565
- Manufacturer Part Number
- W10196406RW
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
chris from ABERDEEN, SD
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together.
Read more...
- Fix Number
- FIX340571
- Manufacturer Part Number
- 330031
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Doris from Skoke, IL
Elements heat sporatically
I followed the steps in the instructions which were very easy, once the electric power was turned off to the range. I replaced 2 burner plug in blocks in less than 30 minutes. I am embarrassed to say that these burners have not been functional for almost 3 years. I thought that I could not work with electric. Just make sure you have the tools on hand and read the instructions first. I am a mid-50's female, if I can do this so can anyone else!
Read more...
- Fix Number
- FIX1570190
- Manufacturer Part Number
- 12001676
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Steven from Westerly, RI
Burner Receptacle replacement
unplugged stove, removed old burner, lift top (mine did not have retaining screws), cut old wires, unscrewed Receptacle, screwed in new Burner Receptacle, used the wire strippers to strip back the old wire, then used the wire tie to connect (very very easy). done! plugged back in the new burner element (old one was burnt up) and plugged the stove back in, complete! works great! My wife loves me again! :)
Read more...
- Fix Number
- FIX11743366
- Manufacturer Part Number
- WP660532
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Diana from Iola, KS
- Fix Number
- FIX11744708
- Manufacturer Part Number
- WP7737P026-60
Installation Instructions
Anthony from KING GEORGE, VA
Old non oem knobs were worn out.
Ensure the stove is off (all burners in the off position).Remove the old non oem knobs and the adapters. Just pull, no tools needed.
Push new knobs onto original posts, aligning the red line facing you - that is, in the off position
Begin use.. Read more...
- Fix Number
- FIX12070192
- Manufacturer Part Number
- W10900107
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Howard from Carrollton, TX
Needed to replace a faulty burner switch
Removed the old switch by unplugging the electric connectors to the switch, removed the palnut, and took the old switch out. Placed the new switch in, reconnected the electric connectors. Mounted the new bracket, trimmed the shaft to fit, tightened the new palnut, selected the new dial adapter that was suitable, put the old dial back on, and it was done! Very easy. Anyone can do it.
Read more...
- Fix Number
- FIX11744709
- Manufacturer Part Number
- WP7737P029-60
- Fix Number
- FIX474316
- Manufacturer Part Number
- 5308016255
- Fix Number
- FIX2007393
- Manufacturer Part Number
- 12500060